PS-331 ~Cyclic Step Counter counter~

PS-331 ~Cyclic Step Counter counter~

Leaflet

Description

PS-331 is a cycle step counter (cutting counter) that can easily set the control of the die with two or more strikers.
Making of count position stepping by manual operation, Set the output of the corresponding striker turning off, then set the position in the return and complete it.
In addition, it is possible to confirm it by counting by manual operation.
Maximum eight outputs, a large capacity up to 1000 steps can be possible to correspond to all complex processing.
Moreover, if the pattern often used by the memory of 20 banks is memorized, the time of the re-setting can be saved.

Features


Eight outputs are included in one. The time of the installation is reduced.
Counting is possible up to 1000 steps.
Four output forms can be selected.
The memory bank can register the output setting of each product (20 banks).

Dimensions


PS-331

PS-331

PS-331 Dimensions

Specification


 Input
 TM  1 input   Internal voltage type
 EXT RESET  1 input   Internal voltage type
 CONTROL IN  1 input   Internal voltage type
 OPERATION INHIBIT
 1 input   Internal voltage type
 RESERVE1  1 input   Internal voltage type
 RESERVE2  1 input   Internal voltage type
 Specifications of input internally powered (DC 12V)
 ON level  3.0V or below    8mA or over (max. 10mA)
 OFF level  9.0V or over    1mA or below
 Output
 OUT1 ‐ OUT8  8 output     SSR output
*In order to control output, insert our specified AC load or DC load SSR into SSR socket of back side substrate inside body. The AC load SSR is populated at OUT1 and OUT2 SSR socket normally. Other SSR for controlling output is sold separately.
 READY OUT  1 output     contact output
 Specifications of output
 SSR output
 AC SSR for load   (Made of Panasonic AQ6213)
 Load voltage:AC75-220V
   Maximum load current:2A(Ambient temperature 30 degrees max.)
   Miinimum load current:50mA
   Voltage drop at closed circuit:1.6V max.
   Zero cross circuit (turn on/turn off)
   
 DC SSR for load   (Made of Panasonic AQ6316)
 Load voltage:DC3-60V
   Maximum load current:2A(Ambient temperature 40 degrees max.)
   Miinimum load current:5mA
   Voltage drop at closed circuit:1.6V max.
 Contact output  DC30V / AC250V 2A
 +12V  DC12V (100 mA max.)
 Others
 Power supply voltage  AC100 - 220 V   +/-10%
 Weight  Body 2.5 kg (inc. mounting brackets.)
 Dimensions(WHD)  200 * 98.5 * 184 mm (An umbo is not included.)
 Ambient operating temperature  0 to 55 degree C (No sudden temperature change during the use.)
 Ambient operating humidity  35 ~ 85% RH (non condensing)
 Ambient operating atmosphere  Free of corrosive gas, dust
 Attachments  Output cable (Standard: 5 m)
 Instruction manual
 AC load SSR 2PCS (already populated at OUT1 and OUT2)