CS-860-2 Box changer

Leaflet
CS-860-2SHA
CS-860-2SSH
CS-860-2H

Description

Box changer CS-860-2 is a device of the press product that puts the box and does the calculation of the product and the clearing work of the box by work. In the method using a past pre-set counter, it was necessary to stop the press device when the counter reaches the preset value, and to reactivate by the manual operation. In reactivation by the manual operation, the press device remains stopping if there is no worker to be near. Therefore, utilization rates decreases. CS-860-2 is equipped with the counter for the box exchange. Boxes can be exchanged without stopping the press device when using it together with a special shutter or the belt conveyer. Moreover, press-interlocking has the function to reactivate though the press device is stopped at the box exchange. It is possible to save labor by these functions, and, in addition, the press device can be driven in high utilization rates.

Features

Box size free design! Easily adjust to different box sizes.
Able to change a box without stoppage of press machine by 3 kinds of interlocking operation.
- (1) Sensor switch-shutter of hopper interlocking operation. (CS-860-2SSH,-2SSH+100)
- (2) Cam switch-shutter of chute interlocking operation. (CS-860-2SHA)
- (3) Cam switch-belt conveyer interlocking operation. (CS-860-2H)
Long-term stable use possible because of an enhancement in lifter.
Prepare 2 different heights of hoppers. (SSH, SSH+100)
Lightweight and Compact design! Easy Operation! Reasonable Price!
Other functions included.
- Adjustable closing shutter timing of hopper and chute in order to avoid having product stuck in.
- Able to stop press machine at the planned number of products.
- Able to modify the number of products(number of counts) inside a box through the operating panel.

Dimensions

CS-860

CS-860-2H
CS-860-2SSH
CS-860-2SSH+100(long version)
CS-860-2SHA

Specification

Range that can be handled

Size of box

Width 300 ~ 670 mm (Direction of clamping)
ength 200 ~ 420 mm (Feed direction)

Height	CS860-2SSH	100 ~ 235mm
	CS860-2SSH+100	100 ~ 335mm
	CS860-2SHA
	CS860-2H

Weight when empty box is piled

15 kg (max.)

Weight when product enters box

20 kg (max.) (The weight of the box is contained)

Shutter

Size of shutter open mouth

230 * 145 mm

Sensor sensitivity

4 mm in diameter globe corresponding (sensitivity setting possible)

Controller

The value of the count is memorized

Storage hold time

15 days or more (In five hours)

Conveyer control output

Under 2 A The output voltage depends on the power supply.

Stop output relay

AC240 V / DC30 V 2 A Transfer point of contact

Supplementary output

SSR (AC240 V 0.5 A) / relay (AC240 V / DC30 V 3 A)

Power supply for sensor

DC12 V 0.2 A

Others

Weight

45kg

Power supply

AC100V±10％ 50/60Hz

Supply air pressure

0.3A

Ambient operating temperature

500 ~ 900kPa （5 ~ 9kgf/c㎡）

Temperature

0 ~ 55℃

Humidity

35 ~ 85％

Ambient operating atmosphere

Free of corrosive gas, dust

Attachments

Main body of CS-860-2

(Specify shutter or chute presence.)

Output cable(3 m)

Instruction manual

Option

CS-860-2H Only Main unit

Only Main unit

Size of box
Width	300 ~ 670mm
Length	200 ~ 420mm
Height	100 ~ 335mm

Because the sensor for the count has not adhered, the signal (point of contact) for the count from the outside is necessary.

CS-860-2H

CS-860-2SSH With Hopper

Size of box
Width	300 ~ 670mm
Length	200 ~ 420mm
Height	100 ~ 235 (CS-860-2SSH) 100 ~ 335 (CS-860-2SSH+100)

When the product enters the shutter, it counts because the sensor for the count has adhered.

CS-860-2SSH

CS-860-2SSH+100(long version)

CS-860-2SHA With Chute

CS-860-2SHA With Chute

Size of box
Width	300 ~ 670mm
Length	200 ~ 420mm
Height	100 ~ 335mm

Chute position can be adjusted by 200 mm.
Because the sensor for the count has not adhered, the signal (point of contact) for the count from the outside is necessary.

CS-860-2SHA