OS-33 Light sensor
Description
The grooved light sensor OS-33 is a transmissive photoelectric sensor intended for material feed detection in automatic press processing.
This product is used by connecting to our mistake detection devices PS-682, PS-662, PS-661, etc.
Features
- slim design
- About half the width of our conventional product LS-32.
- Vertical and horizontal dimensions and mounting hole positions are the same, so replacement is possible.
- red LED
- The position of the sensor can be easily adjusted using the red LED.
- Modulated light method
- Reduces the influence of ambient light.
- Power supply voltage DC12-24V compatible
- Remote configurable
- Sensitivity, presence/absence detection ON/OFF, and signal output polarity can be set from our mistake detection device (PS-682 only).
- *However, the settings for connections other than PS-682 will be default values.
Dimensions
OS-33 Dimensions of the body
Specification
| Model | OS-33 |
|---|---|
| Detection range | 25mm |
| Minimum size of object to detect | 0.5mm diameter bar(opaque, non-remote) （However, at sensitivity 9, a rod with a diameter of 0.1 mm） |
| Response time | 1ms |
| Light source | Red(640nm) |
| Signal output | NPN output, Max. 100mA |
| Power supply voltage | DC12-24V |
| Consumption current | Max. 50mA |
| Temperature | 0 to 55°C (no sudden change during use) |
| Humidity | 35 to 85% RH (non-condensing) |
| Operating ambient environment | No corrosive gas or dust |
| Weight | 0.3kg(cable included) |