PS-218 ~Mist spray system~
Description
The lubrication device PS-218 is designed to thinly spread the processing oil on the
material in the
press metalworking.
PS-218 is composed of the controller, the oil distribution device, and the nozzle. The
controller
takes charge of controlling the solenoid valve for the nozzle air and adjusting the spraying
amount
of the oil.
The oil distribution device is composed of the solenoid valve, the air regulator, and the
pressurizing tank. The oil distribution device distributes the oil in the pressurizing tank
to the
nozzle by the controller's instruction.
Adjust the amount of spraying by opening the installed solenoid valve of each nozzle for
timing and
the time decided in the oil control mode.
Five nozzles or less can be connected with the oil distribution device. The number of
nozzles that
can be connected with the oil distribution device varies depending on the model of PS-218.
Features
- The amount of the oil spraying can be adjusted remotely.
- Set up the oil distribution device near the spraying nozzle. You can set up the controller away from the nozzle.
- The amount of oil spraying is automatically adjusted.
- Even if strokes per minute of the press are changing, the amount of spraying oil per unit area of the material can be kept constant by connecting timing from the press machine with the controller.
- The consumption of the processing oil can be reduced.
- A high adhesion rate and an intermittent spraying have the effect of dramatically decreasing the consumption of the oil.
- The amount of spraying can be precisely adjusted.
- The digital controller regulates operation time of the solenoid valve
precisely.
The operation time is set to the digital controller by the unit of 0.01ms.
- The digital controller regulates operation time of the solenoid valve
precisely.
- PS-218 is congenial to the B.D.C detector PS-464.
- PS-218 enhances the detection ability of the B.D.C detector required by the
precise
press processing.
In the conventional lubrication, shifting in the amount of the oil adhesion concealed the blotted slug generation. A level spraying of PS-218 achieves full performance of PS-464 to be able to show 0.1µm of high resolution, which results in enhancing its detection ability.
- PS-218 enhances the detection ability of the B.D.C detector required by the
precise
press processing.
Dimensions
PS-218 Controller
PS-218 Tank (3 L)
Specification
| Spraying control | |
| Number of nozzles | 5 (max) |
| Oil flow control | Valve open time control |
| External input (TM, CLUTCH, OP-INH) | |
| Input specification | Internal voltage (DC12 V) type Connect the contact or the semiconductor switch of the no-voltage |
| High level | 9.0 ~ 50 V 0 ~ 1 mA |
| Low level | 0 ~ 3.0 V 8 ~ 10 mA |
| Output (Stop, Continuous inhibition) | |
| Output specification | Relay contact AC240 V , DC30 V / 3 A (max.) |
| Power supply, etc | |
| Power supply voltage | AC100 ~ 240 V +/-10% 50/60Hz |
| Maximum current | 0.8 A / 100 V 0.4 A / 200 V |
| Weight | 2.3 kg |
| Dimensions(WHD) | 200 * 83.5 * 184 mm (An umbo is not included.) |
| Ambient operating temperature | 0 to 55 degree C (No sudden temperature change during the use.) |
| Ambient operating humidity | 35 ~ 85% RH (non condensing) |
| Ambient operating atmosphere | Free of corrosive gas, dust |
Nozzle unit
ST8-0.5
ST8-AUX
Nozzle unit installation treatment device
APB-1
