PS-225 ~Lubrication Device~
Description
Lubrication device for stamping that enables fine flow adjustment without contact by featuring a low pressure atomization spray nozzle and a digitally controlled oil solenoid valve.
Features
- Easy operation
- Oil quantity is set numerically.
Button operation to turn ON / OFF the nozzle.
- Oil quantity is set numerically.
- Reduction of oil usage
- There is no wasteful oil or air consumption by applying oil in conjunction with the press.
In addition, It is also possible to apply spot oil to the workpiece to be transported because the applying timing is independent for each nozzle.
- There is no wasteful oil or air consumption by applying oil in conjunction with the press.
- Reduction of maintenance manhours
- The nozzle is compact and maintenance-free because of a simple structure with no sliding parts.
Dimensions
PS225-SPT5ST01 Dimensions
PS225-SPT5ST01 
PS225-SPT10ST01F2 Dimensions
PS225-SPT10ST01F2
PS225-SPT20DST01F1 Dimensions
PS225-SPT20DST01F1
PS225-SPT20ST02F3 Dimensions
PS225-SPT20ST02F3
Specification
| PS-225 controller | |
| Available nozzle | ST8PL-1.0 / ST8PL-AUX |
| Viscosity | ～ 120cSt(mm/s)* * The diameter of the oil tube varies depending on the usage conditions. |
| Number of channel | 3 |
| Number of air regulator for spray | 1 |
| Input | Spray command(CLUTCH, CAM), Float switch(OE,DE), Flow switch(IN1,2,3), Timing(T1,2,3), Control(RESET,LOCK)/ Internal +24V |
| Output | STOP, READY (Contact output Max. 250VAC / 30VDC 3.0A) |
| Power | 100-240VAC ±10% 30VA |
| Supply pressure | 0.4 - 0.8MPa |
| Environment | 0 ～ 55 ℃ (must not be sudden change while using it) 35 ～ 85%RT(no dew condensation allowed) Free from flammable gas, oil smoke, corrosive gas and dust |