PS-228/226 Lubrication Device
Description
PS-228/226 is friendly introduction of mist spray system in plentysystem variation. Evenness
spray
condition lead you expect not only decreasing in the usage of stamping oil or reducing slug
and
clogged slug but also stabilization of processing accuracy. It is equipped with monitoring
of flow
rate abnormalities and remote switching of banks and nozzles.
There are digital flow controllable PS-228 and easy operation of PS-226.
Dimensions
PS228-L6v-SPT5ST01 Dimensions
PS228-L6v-SPT5ST01 
PS228-L6p-S20SB01 Dimensions
PS228-L6p-S20SB01
PS228-L6p-P20D10SB01 Dimensions
PS228-L6p-P20D10SB01
PS228-L12v-SPT20SB02 Dimensions
PS228-L12v-SPT20SB02
PS228-L6p6v-P20SPT20SB02 Dimensions
PS228-L6p6v-P20SPT20SB02
PS226/2262-6c-SPT10ST01 Dimensions
PS226/2262-6c-SPT10ST01
PS226/2262-2c-2261P10ST01 Dimensions
PS226/2262-2c-2261P10ST01
Specification
| PS-228 | PS-226 | |
|---|---|---|
| Available nozzle | ||
| ST8PL-1.0/ST8PL-AUX | ● | × |
| ST8-0.5/ST8-1.0/ST8-AUX | ● | ● |
| Number of nozzle, oil pump(valve) | MAX. 12 | 6 *More than 7 is custom-build |
| Number of sensor input | 6 | |
| Number of regulator for spray | 2 | |
| Input | spray command, Float switch, Control, Bank selection(PS-228), Nozzle selection(PS-226) / Internal +24V 
|
|
| Output | Stop, Ready Contact output Max. 250VAC / 30VDC 3.0A  |
|
Status Non-contact output Max. 30VDC 100mA |
Power | 100 - 240VAC ±10% 50/60Hz Max.150VAf(PS-228) Max.50VA(PS-226) |
| Others | Supply pressure | 0.4 - 0.8MPa | Temperature | 0 - 55 °C(must not be sudden change while using it) | Humidity | 35 - 85%RT(no dew condensation allowed) | Environment | Free from flammable gas, oil smoke, corrosive gas and dust |