PS-321 Cutting counter

Description

Cutting counter PS-321 is designed to produce and output control signals from the Count input signal. The control signals are produced based on the Count cycle.

Features

• Three forms of Count modes
  • You can select three forms of Count modes by pushing buttons on the front panel.
  • In the Count mode 1, two channels operate independently.
  • In the Count mode 2 and 3, output is controlled by two setting values for one Counter.
• Easy-to-change Count values by panel operation
  • Without applying Count signals, you can change the Count value by the front panel operation.
• Prohibition of unnecessary operations
  • PS-321 has the operation prohibition function to prevent errors in operations.
• Independent SSR and open collector output
  • Each channel has SSR and open collector output. Four outputs or less are available.
• Variety of output forms
  • You can select out of 4 output forms in the Count mode 1 and 15 forms in the Count mode 2/3.
  • You can select them by the device setting.SSR and open collector can be set separately.
• Counter control functions such as Count interruption and Count reset
  • In the Count mode 2/3, the Count input 2 can be also utilized as a Counter control input.
• Built-in SSR for output
  • ACSSR or DCSSR for output can be installed. To replace SSRs, remove the back panel. Use the SSR specified by Sugiyama Electric System Inc.
• Remote control available (OPTION)
  • Most operations can be remotely controlled by commands from such devices as the programmable controller. However, optional settings are required.

Dimensions

PS-321

PS-321

Specification