PS-581 ~Transfer detector~

Description

The Transfer Detector “PS-581” detects grip errors in transfer pressing and outputs a stop signal to press machine in the event of error.
It communicates with sensors installed on grips and detects errors by use of timing signal synchronized with advancing or returning operation.
A preset counter is installed in it to provide counter function.
It is ethernet compatible to connect to personal computer or PLC.

Features

Detection function
- Detectable channels increased from 24 channels to max. 30 channels.
- NPN type or PNP type sensor can be used by changing the setting.
- Link operation provides operation linked with more than one machine (optional).
- Vacancy operation and Start-Stop (SS) operation facilitated by an LCD.
Provided with helpful functions for production control
- Amount of production is controlled by a counter.
- Up to 99 patterns can be registered.
- A record of up to 500 errors and counter outputs can be saved.
- Calling pattern by ID tag (optional) is available.
Ethernet supported
- The setting or the like in HTML format can be checked.
- The saved record can be downloaded in CSV format.
- UDP protocol and Telnet protocol enable various settings and operations.

Dimensions

PS-581 Dimensions

Back view

Specification

Detect
Channels	30 Channels
Detect mode	Synchronization, Pass
Operation mode	Normal operation, Vacancy operation, Start-Stop operation
Power source for sensors (by the total)	24VDC (Max. 400mA)
Output response time	Max. 10 ms
Counter
Digits	Total Counter:6 Preset Counter:6
Output response time	Max. 10 ms
Input/Output
Power source voltage	100 to 240 VAC ±10%, 50/60 Hz (Max. 40 VA)
Relay output	EMG Stop, TDC Stop, READY, ALARM (Max. 250 VAC / 30 VDC 3.0 A)
External input (NPN)	ON/OFF, RESET, LOCK, TIMING (ADV,RET)
Sensor input (NPN/PNP switchable)	No-voltage contact DC 3-wire NPN/PNP open collector DC 2-wire sensor
Ethernet
Physical layer	10BASE-T/100BASE-TX
Protocol	IPv4 UDP, DHCP, HTTP, Telnet
Construction
Dimensions of the body	200(W)×98.5(H)×190(D) excluding projections
Weight	3.0 kgW (inc. mounting bracket)
Environment
Temperature	0 to 55 °C (must not be sudden change while using it)
Humidity	35 to 85 %RH (no dew condensation allowed)

Peripherals(Option)

The feed bar preforms a back-and-forth motion for each process.
Use a connection box and a connection cable to facilitate maintenance of wiring.
Preparing a spare cable brings more relief.