PS-333 ~Cyclic Step Counter ~

PS-333 ~Cyclic Step Counter counter~

 Differences between PS-333 and PS-331
 Information of end of life for PS-333


PS-333 is a cycle step counter (cutting counter) that can easily set the control of the die with two or more strikers.
Making of count position stepping by manual operation, Set the output of the corresponding striker turning off, then set the position in the return and complete it.
In addition, it is possible to confirm it by counting by manual operation.
Maximum eight outputs, a large capacity up to 1000 steps can be possible to correspond to all complex processing.
Moreover, if the pattern often used by the memory of 20 banks is memorized, the time of the re-setting can be saved.


Eight outputs are included in one. The time of the installation is reduced.
Counting is possible up to 1000 steps.
As output values are set (to ON/OFF state) on a-per-step basis for every channel, intuitive setting operations are possible.
Four output forms can be selected.
The memory bank can register the output setting of each product (20 banks).




PS-333 Dimensions


 TM  1 input  
 EXT RESET  1 input  
 CONTROL IN  1 input   
 1 input  
 RESERVE1  1 input  (can be set as count input)
 RESERVE2  1 input  (can be set as count input)
 Specifications of input internally powered (12V DC)
 ON level  3.0V or below    8mA or over (max. 10mA)
 OFF level  9.0V or over    1mA or below
 OUT1 ‐ OUT8  8 outputs: Output from built-in SSR
 (Both AC load and DC load acceptable solid state relay)
 READY OUT  1 output     contact output , Normally Open
 Specifications of output
 SSR output  Load voltage: 60 VDC or less /220 VAC or less
 Maximum load current: 2A (Ambient temperature: less than 40℃, single SSR)
 OFF state leakage current: 5mA or less (at 200 VAC)
 On state voltage drop: 1.6V or less (at carrying maximum load current)
 Contact output  30VDC / 250VAC 2A
 +12V  12VDC (100 mA max.)
 Power supply voltage  100 - 240 VAC±10%
 Weight  Body 2.5 kg (inc. mounting brackets.)
 Dimensions(WHD)  200 * 98.5 * 184 mm (An umbo is not included.)
 Ambient operating temperature  0 to 45°C
 Ambient operating humidity  35 ~ 85% RH (non condensing)
 Ambient operating atmosphere  Free of corrosive gas, dust
 Attachments  Output cable (Standard: 5 m)
 Instruction manual