Peripherals | Order codes | Leaflet![]() |
Detection function
|
|
Provided with helpful functions for production control
|
|
Ethernet supported
|
Item | Specifications | |
Detect | Channels | 30 Channels |
Detect mode | Synchronization, Pass | |
Operation mode | Normal operation, Vacancy operation, Start-Stop operation | |
Power source for sensors (by the total) |
24 VDC (Max. 400 mA) | |
Output response time | Max. 10 ms | |
Counter | Digits | Total Counter:6 Preset Counter:6 |
Output response time | Max. 10 ms | |
Input/Output | Power source voltage | 100 to 240 VAC ±10%, 50/60 Hz (Max. 40 VA) |
Relay output | EMG Stop, TDC Stop, READY, ALARM (Max. 250 VAC / 30 VDC 3.0 A) |
|
External input (NPN) |
ON/OFF, RESET, LOCK, TIMING (ADV,RET) |
|
Sensor input (NPN/PNP switchable) |
No-voltage contact DC 3-wire NPN/PNP open collector DC 2-wire sensor |
|
Ethernet | Physical layer | 10BASE-T/100BASE-TX |
Protocol | IPv4 UDP、DHCP、HTTP、Telnet、FTP |
|
Construction | Dimensions of the body | 200(W) × 98.5(H) × 190(D) excluding projections |
Weight | 3.0 kgW (inc. mounting bracket) | |
Environment | Temperature | 0 to 55 °C (must not be sudden change while using it) |
Humidity | 35 to 85 %RH (no dew condensation allowed) |