Spring sensor

The spring sensor is contact type sensor.
When a conductive workpiece contacts the sensor rod, the sensor circuit closes and an electric signal flows.
Therefore, this sensor can detect touch of only conductive workpiece.
The cable for spring type contact sensor of US-1 and USD-1 is 6 kinds of color. Blue, Red, White, Yellow, Pink and Orange are prepared.
(US-2 - US-7 and USD-2 - USD-7 are nothing but Red cable and White cable. )
US series and USD series are the same in form except connector.
USE-1 and USE-2 are possible to specify the spring diameter, the cable length, connector and others of US-1, US-2, USD-1 and USD-2 by your choice.
USE-E series is extension cable for RCA pin-plug.USE-DE series is extension cable for DIN-plug.

US series is spring type contact sensor with pin-plug.
It gets connected to PS-662, PS-661, PS-104 or PS-101.
It is necessary Pin-DIN conversion cable of which connector, cable color and cable length are fixed or USE-DE when connect to PS682.
Pin-DIN conversion cable is an included items when purchase PS682.
(Note, however, that only if 「01」 is selected at the order code of accessory of sensor.)

USD series is spring type contact sensor with DIN-plug.
It gets connected to PS-682. It is necessary USE-E when connect to PS-662, PS-661, PS-104 or PS-101.

USE series is enlargement spec of spring type contact sensor such as US-1(USD-1), US-2(USD-2).
USE-E and USE-DE make the cable of US series, USD series and USE series extend.